Lathes, Jointers & Routers

These glass cutters match the outside diameter of our Stile and Rail sets so you can stack them together for a one pass cut. (Cutter does not cut g...

These glass cutters match the outside diameter of our Stile and Rail sets so you can stack them together for a one pass cut. (Cutter does not cut g...

Makes rabbet or slot cuts for inserting panels or grass into framework 5,000-10,000 RPM A = 2-5/8 Inch Cutter Diameter B = 3/4 Inch Cutting Lengt...

Used to make V-groove paneling, wainscoting, decking and flooring, these industrial quality shaper cutter sets are manufactured with 3 mm thick C-2...

Used to make fluted edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diameter B = ...

Used to make rabbet or slot cuts for inserting panels or grass into framework. This industrial quality shaper cutter is manufactured with 2mm thick...

These glass cutters match the outside diameter of our Stile and Rail sets so you can stack them together for a one pass cut. (Cutter does not cut g...

Used to make 45 degree bevel edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. A = 3-1/...

Customize stile and rail set for standard thickness plywood panels with these cutters and spacers. Choose the 5.5mm set for undersized 1/4 inch pan...

Customize stile and rail set for standard thickness plywood panels with these cutters and spacers. Choose the 5.5mm set for undersized 1/4 inch pan...

Customize stile and rail set for standard thickness plywood panels with these cutters and spacers. Please note that changing the tongue thickness w...

Used to make V-groove paneling, wainscoting, decking and flooring, these industrial quality shaper cutter sets are manufactured with 3 mm thick C-2...

Used to make decorative astragals, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diamet...

Used to make decorative edges, this industrial quality shaper cutter is manufactured with 2mm thick C-2 carbide. 7000-13,200 RPM. A = 2 Inch Cutte...

Used to make cabinet door edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diameter...

Used to make decorative edges, this industrial quality shaper cutter is manufactured with 2mm thick C-2 carbide, 7,000-13,200 RPM. A = 2 Inch Cutt...

Used to make decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diameter ...

Used to make decorative astragals, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diamet...

Used to make decorative edges, this industrial quality shaper cutter is manufactured with 2mm thick C-2 carbide, 7,000-13,200 RPM. A = 2 Inch Cutt...

Used to make decorative edges, this industrial quality shaper cutter doubles as a roundover cutter and a 45 degree chamfer cutter. Made from 2mm C-...

Used to make cabinet door edges with built-in finger pulls, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A =...

Used to make cabinet door edges, this industrial quality shaper cutter is manufactured with 2mm thick C-2 carbide, 7,000-13,200 RPM. A = 2 Inch Cu...

Used to make cabinet door lip edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diam...

Use this very popular profile to finish a cabinet door lip (3/4 inch material) for flush overlay mounting. This high quality cutter is manufactured...